INFLUENCE OF THE STRUCTURE AND TYPE OF EXTERIOR WALLS ON THE OPTIMALITY INDICATORS OF MULTI-STOREY REINFORCED CONCRETE FRAME BUILDINGS BUILT IN SEISMIC AREAS

Article Sidebar

PDF
Issue: Vol. 2 No. 5 :
Section: Articles
Published:
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Main Article Content

Doctor of Technical Sciences, Professor, Turin Polytechnic University in Tashkent
info@in-academy.uz
2nd year master student, Tashkent Institute of Architecture and Civil engineering
info@in-academy.uz
2nd year PhD doctoral student Tashkent Institute of Architecture and Civil engineering
info@in-academy.uz

Abstract:

The article is devoted to the review and calculation on the topic of using external walls made of various materials, such as: brick, aerated concrete and frame-sheathing walls - used as enclosing structures in multi-storey reinforced concrete frame buildings. Frame-sheathed walls today have broad prospects for introduction into mass construction in Uzbekistan and abroad and can be used in the construction of a number of buildings and structures for various purposes.

Keywords:

Article Details

How to Cite:

Khodjaev, A. ., Karimjonov, I. ., & Saidakromov, A. . (2022). INFLUENCE OF THE STRUCTURE AND TYPE OF EXTERIOR WALLS ON THE OPTIMALITY INDICATORS OF MULTI-STOREY REINFORCED CONCRETE FRAME BUILDINGS BUILT IN SEISMIC AREAS. Eurasian Journal of Academic Research, 2(5), 425–438. Retrieved from https://in-academy.uz/index.php/ejar/article/view/2982

References:

KMK 2.01.03-19. “Construction in seismic areas”, T-2019.

Zhmarin E.N. International Light Steel Construction Association. Internet magazine "Construction of unique buildings and structures", 2012, No. 2, pp. 27-30.

Exterior walls with a frame made of light steel thin-walled structures (LSTC). Bezborodov Evgeny Leonidovich – Senior Lecturer of the Department of Design of Buildings and Structures, National Research Moscow State Civil Engineering University (NRU MGSU).

Light steel thin-walled structures in high-rise buildings. Sovetnikov D.O., Videnkov N.V., Trubina D.A. Peter the Great St. Petersburg Polytechnic University, 195251, Russia, St. Petersburg, st. Politekhnicheskaya, 29. Submitted on October 6, 2014, accepted on February 17, 2015.

Vatin N.I., Popova E.N. Thermoprofile in light steel building structures. St. Petersburg: SPbSPU Publ., 2006. 63 p.

Rybakov V. A., Gamayunova O. S. Stress-strain state of elements of frame structures from thin-walled rods. Construction of unique buildings and structures. 2013. No. 7(12). pp. 79-123.

Vatin N.I., Sinelnikov A.S. Long-span elevated pedestrian crossings from a light coldformed steel profile. Construction of unique buildings and structures. 2012. No. 1. pp.47- 52.,

Vatin N. I., Sinelnikov A. S. Cold-formed steel profile in small bridge structures. Construction of unique buildings and structures. 2012. №3. pp. 39-51.

Vatin N.I., Volodin V.V., Zolotareva E.A., Petrov K.V., Zhmarin E.N. Reconstruction of the roofs of St. Petersburg based on light steel thin-walled structures and an anti-icing system. .. Engineering and construction magazine. 2010. No. 2 (12). pp. 59-64.

Vatin N.I., Popova E.N. Thermal profile in light steel building structures. St. Petersburg: SPbSPU Publ., 2006. 63 p.

Rybakov V.A., Gamayunova O.S. Influence of wall perforation on the bearing capacity of thermal profiles. StroyPROFIL. 2008. No. 1. P. 128.

Kuzmenko D.V., Vatin N.I. The enclosing structure of "zero thickness" is a thermal panel. Engineering and construction magazine. 2008. No. 1. pp. 13-21.

Nazmeeva T.V. Bearing capacity of compressed steel thin-walled elements of solid and perforated section from cold-formed C-profile. Engineering and construction magazine. 2013. No. 5(40). pp. 44-51.

Rybakov V.A., Gamayunova O.S. Stress-strain state of elements of frame structures from thin-walled rods. Construction of unique buildings and structures. 2013. No. 7(12). pp. 79-123.

Zhmarin E.N. International Light Steel Construction Association. Construction of unique buildings and structures. 2012. No. 2. P. 27-30., 126 Davies J. M. (2000). Recent research advances in cold-formed steel structures. Journal of Constructional Steel Research. 2000 Vol. 55. Issue 1. Pp. 267-288.

Niu S., Rasmussen K. J., Fan F. (2014). Distortional–global interaction buckling of stainless-steel C-beams: Part II–Numerical study and design. Journal of Constructional Steel Research. 2014. Issue 96. Pp. 40-53.

De Miranda Batista E. (1989). Effective section method: A general direct method for the design of steel cold-formed members under local-global buckling interaction. Thin-Walled Structures. 2010 Vol. 48. Issue 4. Pp. 345-356.