PLANNING AND MINE DESIGN IN OPEN-PIT MINING PROCESSES AT MINING ENTERPRISES
Main Article Content
Аннотация:
This article presents the problem of short-term planning of open-pit mining processes and work shifts in mines and the design process of technological mine parameters in open mines is shown. The problem is mine and waste as well several problematic situations in truck parks and drop-off points are highlighted. Truck distribution is dynamic to permit each truck must be assigned multiple routes. The problem is deciding which one facades should be mined and specify the number of trucks, their routes and directions, and the amount of material transported by them to each drop-off point is satisfactory we can see the calculation ratio and their indicators as needed. The goals are to minimize the deviations starting with production targets, chemical grade and particle size range of each parameter control in each plant and reduce the number of trucks we can give examples of processes. To solve the problem, we developed a mixed integer linear objective programming model and tested it using real data from an iron ore mine. The results showed the proposed approach supports decision makers in sizing and allocation and in meeting the required targets of truck fleets and production and control parameters by ore processing plants in a day-to-day scenario such as low availability the flexibility of shovels and trucks, ore quality, and the need to increase production have been widely discussed.
Article Details
Как цитировать:
Библиографические ссылки:
Bekturganova, Z., & Jumamuratov, R. (2017). МЕТОДЫ ОБУЧЕНИЯ САМОСТОЯТЕЛЬНОЙ РАБОТЕ УЧАЩИХСЯ НА УРОКЕ ХИМИИ.
Бектурганова, З., & Jumamuratov, R. (2016). Методические особенности и характер формирования понятий по химии.
Kaipbergenov, A., & Jumamuratov, R. (2019). The methodology of teaching chemistry based on the use of computer programs.
Каипберганов, А., Косназаров, С., Нургалиева, М., Jumamuratov, R., & Жумамуратов, Р. (2018). АНАЛИЗ ПРОЦЕССА ПОЛУЧЕНИЯ ТРОНЫ МЕТОДОМ КАРБОНИЗАЦИИ СОДОВОГО РАСТВОРА УГЛЕКИСЛОТОЙ.
Aynazarova, S., & Jumamuratov, R. (2020). ЗНАЧЕНИЕ БИОЛОГИИ В ЖИЗНИ ЧЕЛОВЕКА.
Bekturganova, Z., Bektileyova, G., & Jumamuratov, R. (2017). ИСПОЛЬЗОВАНИЕ НОВЫХ ИНФОРМАЦИОННЫХ ТЕХНОЛОГИЙ В ОБУЧЕНИИ ХИМИИ.
Aynazarova, S., Embergenova, U., & Jumamuratov, R. (2021). KIMYONI O’QITISH VOSITALARI TIZIMI VA UNING DIDAKTIK IMKONIYATLARINI O’RGANISH.
Abdirazakov, I., & Jumamuratov, R. (2022). MAKTABDA KIMYO FANINI O’QITISHDA KOMPYUTER MODELLARINI QO’LLASH.
Kaipbergenov, A., Aynazarova, S., & Jumamuratov, R. (2022). XIMIYA SABAQLIĞIN OQITIWDA INFORMACIYALIQ TEXNOLOGIYALARINAN PAYDALANIW.
Bekturganova, Z., Tangirbergenova, R., & Jumamuratov, R. (2017). ТЕХНОЛОГИИ ОБУЧЕНИЯ НА УРОКАХ ХИМИИ.
Бектурганова, З., Жумамуратов, Р., & Султанов, Д. (2017). РЕКОМЕНДАЦИИ ПО РАЗРАБОТКЕ И ПРОВЕДЕНИЮ С МЕТОДОМ ПРОБЛЕМНОГО ОБУЧЕНИЯ НА УРОКАХ ХИМИИ.
O'TELBAYEVA Muhayyo Alisherovna. (2023). METHODOLOGY AND THEORY OF CHEMISTRY TEACHING IN SCHOOLS, METHODS AND PROCESSES OF THEIR STUDY. Journal of Experimental Studies, 2(2), 10–16. https://doi.org/10.5281/zenodo.7623700
O'TELBAYEVA Muhayyo Alisherovna. (2023). ANALYSIS OF PEDAGOGICAL AND PSYCHOLOGICAL METHODS AND APPROACHES. Pedagogical and Psychological Studies, 2(2), 12–16. https://doi.org/10.5281/zenodo.7624764
Yeshmuratova A. MINE BLASTING PROCESSES OPTIMIZATION STAGES OF DIGITAL TECHNOLOGY OF DETONATORS //Scienceweb academic papers collection. – 2023.
Utepbaeva G. et al. FOAM FLOTATION PROCESS, STAGES AND TECHNOLOGICAL PARAMETERS //Science and innovation. – 2023. – Т. 2. – №. A2. – С. 136-140.
Утемисов А. О., Юлдашова Х. Б. К. СИСТЕМЫ АВТОМАТИЧЕСКОГО УПРАВЛЕНИЯ //Universum: технические науки. – 2022. – №. 5-2 (98). – С. 45-47.
Tulepbergenovich K. B., Orazimbetovich U. A. Classification and analysis of computer programs for the physical preparation of athletes and expasure of prospects for their studies //European science review. – 2015. – №. 7-8. – С. 11-13.
Kaipbergenov A. T., Utemisov A. O., Yuldashova H. B. K. STEADY OF AUTOMATIC CONTROL SISTEMS //Academic research in educational sciences. – 2022. – Т. 3. – №. 6. – С. 918-921.
Orazimbetovich U. A. THE USE OF INFORMATION TECHNOLOGY IN THE FIELD OF PHYSICAL CULTURE AND SPORTS //European Journal of Research and Reflection in Educational Sciences Vol. – 2019. – Т. 7. – №. 2.
Djaksimuratov, K., O’razmatov, J., Yuldashev, S., Toshpulatov, D., & O’telbayev, A. (2021). Geological-Geochemical and Mineralogical Properties of Basalt Rocks of Karakalpakstan.
Djaksimuratov, K., O’razmatov, J., Mnajatdinov, D., & O’telbayev, A. (2021). PROPERTIES OF COAL, PROCESSES IN COAL MINING COMPANIES, METHODS OF COAL MINING IN THE WORLD.
Djaksimuratov, K., Toshev, O., O’razmatov, J., & O’telbayev, A. (2021). MEASURING AND CRUSHING THE STRENGTH OF ROCKS USE OF VARIOUS TYPES OF SURFACTANTS FOR GRINDING.
Djaksimuratov, K., Ravshanov, Z., O’razmatov, J., & O’telbayev, A. (2021). Comprehensive monitoring of surface deformation in underground mining, prevention of mining damage. Modern technologies and their role in mining.
Djaksimuratov, K., O’razmatov, J., Maulenov, N., & O’telbayev, A. (2021). FACTORS INFLUENCING THE CONDITIONS OF OPEN PIT MINING, ORE MASS AND DEFORMATION, PROCESSES THAT LEAD TO IMBALANCE DURING EXCAVATION.
Djaksimuratov, K., Jumabayeva, G., Maulenov, N., & Rametullayeva, M. (2022). Improving the Efficiency of Excavators Increasing the Efficiency of Temporary Ditch Excavator.
Djaksimuratov, K., Jumabayeva, G., Maulenov, N., & Rametullayeva, M. (2022). MONITORING THE CONDITION OF THE DEPOSIT IN MINING ENTERPRISES. MODERN METHODS OF DETERMINING THE LOCATION OF MINERALS.
Djaksimuratov, K., Joldasbayeva, A., Bayramova, M., Tolibayev, E., & Maulenov, N. (2022). TECHNOLOGICAL CLASSIFICATION OF UNDERGROUND EXCAVATION WORKS IN GEOTECHNICAL MONITORING SYSTEMS.
Djaksimuratov, K., Maulenov, N., Ametov, R., Rametullayeva, M., & Bayramova, M. (2022). MODERN TECHNICAL METHODS OF MONITORING LANDSLIDES IN OPEN MINES.
Joldasbayeva, A., Ametov, R., Embergenov, A., Maulenov, N., & Kulmuratova, A. (2022). Technology to prevent Methane or coal dust explosions in the mine.
Djaksimuratov, K., Maulenov, N., Rametullayeva, M., Kulmuratova, A., & Embergenov, A. (2022). Technology for Determining the Force of Impact on Buildings in the Vicinity during Blasting Operations in Mines.
Djaksimuratov, K., Jumabayeva, G., Maulenov, N., & Rametullayeva, M. (2022). CORROSION OF METALS AND FACTORS AFFECTING IT. METHODS OF PREVENTING CORROSION OF METALS.
Kulmuratova, A., Utepbaeva, G., Azizov, A., Yo’ldashova, H., & O’telbayev, A. (2022). AUTOMATION AND ROBOTIZATION OF UNDERGROUND MINES.
Ravshanov, Z., O’razmatov, J., Zaytova, M., Kulmuratova, A., & O’telbayev, A. (2022). Conveyor belt structure and mode of operation in mines.
Djaksimuratov, K., Maulenov, N., Joldasbayeva, A., O’razmatov, J., & O’telbayev, A. (2022). Model Of Stages of Determination of Strength of Dynamic Fracture of Rocks and Digital Technological Verification.
Djaksimuratov, K., Ravshanov, Z., Ergasheva, Z., O’razmatov, J., & O’telbayev, A. (2022). Underground mine mining systems and technological parameters of mine development.
Djaksimuratov, K., Maulenov, N., Joldasbayeva, A., O’razmatov, J., & O’telbayev, A. (2022). Methods of Determining the Effect of Temperature and Pressure on the Composition of Rocks.
Ravshanov, Z., Joldasbayeva, A., Bayramova, M., & O’telbayev, A. (2023). MINING TECHNOLOGICAL EQUIPMENT THAT DETERMINES THE SLOPE ANGLES OF THE MINE BY MEANS OF LASER BEAMS.
Yeshmuratova, A., Kulmuratova, A., Maulenov, N., & Otemisov, U. (2023). MINE BLASTING PROCESSES OPTIMIZATION STAGES OF DIGITAL TECHNOLOGY OF DETONATORS.
Ravshanov, Z., Joldasbayeva, A., Maulenov, N., & O’telbayev, A. (2023). Determination of mineral location coordinates in geotechnology and mining enterprises.
Djaksimuratov, K., Batirova, U., Otemisov, U., & Aytmuratov, S. (2023). STEPS FOR DETERMINING THE SLOPE ANGLE OF AN OPEN MINE.
Djaksimuratov, K., Batirova, U., Abdullaev, A., & Joldasbayeva, A. (2023). GATHERING COORDINATES OF THE GEOLOGICAL AND GEOTECHNICAL LOCATION OF THE MINE.
Ravshanov, Z., Joldasbayeva, A., Bayramova, M., & Madreymov, A. (2023). IN GEOLOGICAL AND GEOTECHNICAL PROCESSES IN THE MINE USE OF TECHNOLOGICAL SCANNING EQUIPMENT IN THE UNDERGROUND MINING METHOD.
Djaksimuratov, K., Jumabayeva, G., Maulenov, N., & Rametullayeva, M. (2022). Casting And Evaluation of Properties for an Aluminum Alloy Material and Optimizing the Quality Control Parameters.
Djaksimuratov, K., Jumabayeva, G., Batirova, U., & O’telbayev, A. (2023). GROUNDWATER CONTROL IN MINES
Abdiramanova, Z., Jumabayeva, G., Batirova, U., & O’telbayev, A. (2023). ACTIVITY OF TEBINBULAK IRON ORE MINING ENTERPRISES IN THE REPUBLIC OF KARAKALPAKSTAN.
Qurbonov.A.A, Djaksimuratov Karamatdin Mustapaevich, & O'telbayev Azizbek Alisher o'g'li. (2021). FACTORS INFLUENCING THE CONDITIONS OF OPEN PIT MINING, ORE MASS AND DEFORMATION. PROCESSES THAT LEAD TO IMBALANCE DURING EXCAVATION. Eurasian Journal of Academic Research, 1(6), 45–49. https://doi.org/10.5281/zenodo.5500210
Oʻtelbayev Azizbek Alisher oʻgʻli. (2022). STRENGTH PROPERTIES OF ROCKS AND FACTORS INFLUENCING THEM AND THE PROCESS OF CHANGING THE PROPERTIES OF ROCKS. https://doi.org/10.5281/zenodo.6034442
Joldasbayeva, A., Maulenov, N., Mnajatdinov, D., & O’telbayev, A. (2023). PROCESSES OF DRAWING UP A VENTILATION SYSTEM SCHEME IN MINES.
Maulenov, N., Joldasbayeva, A., O’razmatov, J., & Mnajatdinov, D. (2023). TECHNOLOGICAL MODES OF MONITORING THE LOCATION OF MINES IN THE MINE AND THE SLOPE BORDER OF THE BLAST AREA.
Maulenov, N., Joldasbayeva, A., Amanbaev, N., & Mnajatdinov, D. (2023). PROCESSES OF BENEFICIATION AND EXTRACTION OF ORES IN IRON MINES (IN THE EXAMPLE OF TEBIN BULAK IRON MINE).
Maulenov, N., Joldasbayeva, A., Amanbaev, N., & Mnajatdinov, D. (2023). DETERMINATION OF VIBRATIONS CAUSED BY BLASTING PROCESSES IN OPEN PIT MINING AT MINING ENTERPRISES.
Maulenov, N., Joldasbayeva, A., O’razmatov, J., & Mnajatdinov, D. (2023). MOBILE TECHNOLOGICAL METHODS OF SAFETY MANAGEMENT IN SURFACE MINING.
Jumabayeva Guljahon Jaqsilikovna. (2023). CONTROL OF UNDERGROUND WATER IN THE MINE, DETECTION AND PREVENTION OF RISKS. ACADEMIC RESEARCH IN MODERN SCIENCE, 2(5), 159–166. https://doi.org/10.5281/zenodo.7648010
Утемисов А. О., Юлдашова Х. Б. К. СИСТЕМЫ АВТОМАТИЧЕСКОГО УПРАВЛЕНИЯ //Universum: технические науки. – 2022. – №. 5-2 (98). – С. 45-47.
Ametov Bayram Tursynbaevich, Uzakbaeva Akmaral Sulayman Kizi, & Allamuratov Guljamal Bisengali Kizi. (2022). Wind Mill and Solar Energy. Texas Journal of Engineering and Technology, 15, 178–179. Retrieved from https://zienjournals.com/index.php/tjet/article/view/3068
Tolibayev Y. et al. WITH CHARGE MELTING METHODS AND LOW METAL CONTENT IN THE FURNACE EFFECT OF ELECTRODES //Международная конференция академических наук. – 2023. – Т. 2. – №. 2. – С. 151-160.
Tolibayev Y. et al. ENVIRONMENTALLY FRIENDLY METHODS OF MINING METAL ORES //Академические исследования в современной науке. – 2023. – Т. 2. – №. 7. – С. 45-56.
Tolibayev Y. et al. METHODS OF ENSURING THE INCREASE IN THE QUALITY OF EXTRACTION OF NON-FERROUS, RARE, RARE EARTH METALS //Science and innovation in the education system. – 2023. – Т. 2. – №. 3. – С. 22-31.
Tolibayev Y. et al. DISADVANTAGES OF TECHNOLOGICAL AUTOMATION IN METAL MELTING //Development and innovations in science. – 2023. – Т. 2. – №. 2. – С. 136-146.
Tolibayev Y. et al. IN METALLURGICAL PROCESS MODELING SYSTEM HIGH TEMPERATURE COPPER REFINING PROCESSES //Models and methods in modern science. – 2023. – Т. 2. – №. 3. – С. 12-22.
Abdiramanova Zamira Uzaqbayevna. (2023). STUDIES ON THE CHEMICAL COMPOSITION AND PROPERTIES OF PORTLAND CEMENT. EURASIAN JOURNAL OF ACADEMIC RESEARCH, 3(3), 13–21. https://doi.org/10.5281/zenodo.7712581
O‘telbayeva , M. ., & O‘telbayev , A. . (2023). EXPERIMENTAL WORKS BASED ON ADVANCED, PEDAGOGICAL-PSYCHOLOGICAL AND MODERN METHODS OF TEACHING CHEMISTRY AT SCHOOL. Евразийский журнал академических исследований, 3(3), 79–88. извлечено от https://in-academy.uz/index.php/ejar/article/view/10938
Ravshanov, Z., Ergasheva, Z., Maxsitaliyeva, L., Pardaev, S., & O’telbayev, A. (2022). 3D Technological System of Management of Geological Exploration Processes of Mining Enterprises.
Mirzabek qizi, A. M., & Orinbay qizi, K. S. (2023). Application of Modern Microprocessors in Technological Measuring Devices and Principles of their Use. Miasto Przyszłości, 32, 320–326. Retrieved from https://miastoprzyszlosci.com.pl/index.php/mp/article/view/1158
Kulmuratova Aliya Janabay qizi. (2023). Automation Technique Design Classification of Technological Objects. International Journal of Scientific Trends, 2(2), 128–136. Retrieved from https://scientifictrends.org/index.php/ijst/article/view/66
Elmurodovich T. O. et al. Measuring and crushing the strength of rocks use of various types of surfactants for grinding //ACADEMICIA: An International Multidisciplinary Research Journal. – 2021. – Т. 11. – №. 10. – С. 557-561.
Djaksimuratov K. Comprehensive monitoring of surface deformation in underground mining, prevention of mining damage. Modern technologies and their role in mining //Scienceweb academic papers collection. – 2021.
Mustapaevich D. K. et al. FACTORS INFLUENCING THE CONDITIONS OF OPEN PIT MINING, ORE MASS AND DEFORMATION, PROCESSES THAT LEAD TO IMBALANCE DURING EXCAVATION //Galaxy International Interdisciplinary Research Journal. – 2021. – Т. 9. – №. 10. – С. 648-650.
Muxtar o’g’li A. R. et al. Technology to prevent Methane or coal dust explosions in the mine //The Peerian Journal. – 2022. – Т. 10. – С. 22-32.
Axmet o’g’li M. A. et al. IN GEOLOGICAL AND GEOTECHNICAL PROCESSES IN THE MINE USE OF TECHNOLOGICAL SCANNING EQUIPMENT IN THE UNDERGROUND MINING METHOD //Intent Research Scientific Journal. – 2023. – Т. 2. – №. 1. – С. 20-27.
Maulenov N. et al. PROCESSES OF DRAWING UP A VENTILATION SYSTEM SCHEME IN MINES //Академические исследования в современной науке. – 2023. – Т. 2. – №. 4. – С. 161-166.
Maulenov N. et al. TECHNOLOGICAL MODES OF MONITORING THE LOCATION OF MINES IN THE MINE AND THE SLOPE BORDER OF THE BLAST AREA //Development and innovations in science. – 2023. – Т. 2. – №. 2. – С. 27-32.
Jumabayeva Guljahon Jaqsilikovna. (2023). CONTROL OF UNDERGROUND WATER IN THE MINE, DETECTION AND PREVENTION OF RISKS. ACADEMIC RESEARCH IN MODERN SCIENCE, 2(5), 159–166. https://doi.org/10.5281/zenodo.7648010
Janabay Qizi, K. A. . (2023). Application of Automation Tasks and Management of Technological Processes. Pioneer : Journal of Advanced Research and Scientific Progress, 2(3), 13–19. Retrieved from https://innosci.org/jarsp/article/view/940
Janabay qizi, K. A., Jumabay o‘g‘li, U. A., & Nuratdinovna, E. A. (2023). Application and Technological Description of Microprocessors in Technological Measuring Devices. Miasto Przyszłości, 33, 89–96. Retrieved from https://miastoprzyszlosci.com.pl/index.php/mp/article/view/1192